地球低纬区边缘大气密度的预测

基于NRLMSISE-00大气模型讨论日地空间环境对地球低纬度地区边缘大气密度的影响,提出预测地球低纬地区边缘大气日平均密度的简化模型法和经验法。简化模型法利用地磁活动和太阳活动的11年准周期特性,通过预测地磁活动和太阳活动的变化规律以预测地球边缘大气密度。经验法则直接利用第23个太阳活动周期的日平均密度变化曲线经过傅里叶变换处理得到日平均密度变化规律曲线,然后将曲线拟合得到不同高度下的密度昼夜波动规律,再利用预测得到的日平均密度即可计算出具体当地时间对应的密度情况。误差分析说明经验预测法比简化模型法精度更高。两种方法均具有较高的精度并且使用方便,可用于地球边缘大气密度的工程化预测计算。     

空间真空环境下密封电磁继电器的触点失效研究

密封电磁继电器有其固有的漏率,在应用于空间真空环境下由于气体泄漏使得其内部气体压力逐渐降低,导致继电器的触点在低气压环境下工作失效（负载切换时）。文章选择国产继电器样品对上述机理进行了试验验证,并对继电器内部气体压力与触点电弧失效的规律进行了研究。     

多喷流干扰级间热环境风洞试验研究

运载火箭级间热分离过程中,级间段受高温高压喷流的影响,所处环境恶劣,研究级间热环境中压力、温度和热流分布规律对级间段结构的优化具有重要意义.在(φ)1m高超声速风洞中,采用以微型固体火箭燃气为喷流介质的热喷流模拟技术,模拟了运载火箭二级主发动机和四个游动发动机同时工作多喷流干扰条件下的级间热环境,并对级间压力、温度和热流测量试验技术进行了研究,获得了不同级间距、不同排燃窗开口数量情况下的二级底封头和一级前封头表面的热流、温度及压力分布特性.试验结果表明,级间距越小,分离环境越恶劣,压力、温度、热流分布越不均匀;总排燃面积保持不变,排燃窗开口数量变化,对一级前封头上的压力、温度、热流影响不大,但对二级底封头影响较为明显,随着开口数量的减少,二级底封头上压力、温度、热流值均有所增大.本项试验采用同轴热电偶测量了级间区域的热流,热流结果精准度的提高以及热流模拟准则还需进一步探索和研究.     

气体分配方式对多隔仓燃油箱地面惰化的影响

在各仓温度和压力为定常边界条件下,采用数值积分法,建立多仓燃油箱冲洗的数值模型,应用波音747中央翼燃油箱,通过将计算结果与国外文献中公布的实验数据进行比较,验证了模型具有较高的计算精度;然后,选择波音737中央翼燃油箱作为研究对象,采用惰化气体均匀和非均匀两种分配方式,在惰化气体流量按体积和数量两种分配方式下,计算出各隔仓氧气体积分数随时间及换气次数的变化关系,结果表明:要使各隔仓均惰化至目标氧气体积分数,按体积分配富氮气体的均匀进气方式所需的惰化时间最短,按数量分配的均匀进气方式所需的时间最长;由左舷、中弦、右弦整体平均氧气体积分数随换气次数的变化,可知非均匀进气方式优于均匀进气方式.      

飞行器复杂外结构的环境热流计算方法

提出了一种通用的、适合飞行器复杂外结构环境热流的计算方法。采用由环境映射面组成的封闭结构对空间飞行器进行包覆,根据飞行器的轨道特征及瞬时位置,确定映射面上环境热流的大小及方向。在映射封闭结构与飞行器表面组成的辐射换热系统中,通过蒙特卡罗法结合设备表面的镜、漫反射特性,计算环境映射面到各设备表面的辐射传递因子,进而获得在轨飞行器不同位置的瞬时环境热流。计算中考虑了结构表面间的遮挡及多次反射问题,解决了空间飞行器因设备众多、尺寸差异大、表面辐射特性不同等给热流计算带来的困难,并为后期的热分析计算提供精确数据。
     

环境应力筛选中的振动试验方法

从振动试验技术的角度讨论了振动应力筛选的方法,分析了振动试验中夹具、安装方式、传感器、振动方向等各种因素和控制策略对环境应力筛选效果的影响,以及电子、机电、机械等不同种类产品的振动应力筛选方案,指出了在振动应力筛选中应注意的问题。     

反转轴间气膜密封动特性分析

用有限元法计算了双端面期末密封两端面的气膜刚度和阻尼,分析了密封跑道质量和主密封环质量对气膜刚度和阻尼的影响,并对瞬态扰动力作用下前密封跑道和主密封环的振动过程进行了讨论.结果表明:膜厚对气膜刚度和阻尼影响较大,在膜厚小于5μm下尤为明显;系统的自由振动频率主要由前密封跑道质量决定,主密封环质量对自由振动频率影响较小;同一密封跑道质量对应的不同环道质量比对系统振动的收敛时间影响不大.     

富氢/富氧燃气同轴直流喷嘴燃烧过程数值模拟

为研究全流量补燃FFSC(Full Flow Staged Combustion)循环发动机气-气喷注器性能,以气氢/气氧(GH2/GO2)预燃室提供的758K富氢燃气和676K富氧燃气为推进剂对同轴直流喷嘴燃烧流场进行了数值模拟.考察了相同燃烧室结构、流量、入口燃气温度条件下,富氧燃气压降、富氢燃气和富氧燃气的速度比、氧喷嘴厚度和氧喷嘴缩进变化对燃烧性能的影响,获得了4个参数的影响规律.数值模拟结果对燃气气-气喷注器结构设计有参考价值.     

Kinetic theory of sheath formation in solar wind plasma

We present a general self-consistent kinetic theory for plasma sheath formation in solar wind plasma. The theory could be applied to anisotropic, as well as to isotropic collisionless plasma without resorting to any simplifications, limitations, or assumptions, such as the necessary existence of a ‘pre-sheath’ region of ions acceleration to ensure the Bohm criterion. The kinetic framework is first applied to sheath formation around an arbitrary oriented planar absorbing surface, charged by solar wind anisotropic plasma, under the condition of negligible photoelectric effect. We then make use of our kinetic approach for the plane geometry in isotropic collisionless plasma, as a particular case of a planar electrode orientation parallel to plasma streaming velocity, also analyzing the sheath structure around spherical and cylindrical absorbing electrodes submerged in isotropic collisionless plasma. Obtained results demonstrate principal differences in spatial charge distributions in sheath regions between spherical or cylindrical electrodes of large size and an unbound planar surface submerged in isotropic plasma. In the case of a planar electrode, we directly compare results obtained in our kinetic and hydrodynamic theories and conventional hydrodynamic theory of plasma sheath formation. The outcome from the present study have direct implications to the analysis of plasma sheath structure and associated distribution in space of charged dust grains, which is relevant to the moon exploration near the optical terminator region or in shadowed craters in the moon.     

Charging of dust grains by anisotropic solar wind multi-component plasma

In this paper we study the charging process of small grain particles by anisotropic multi-component solar wind plasmas (electrons, protons and heavy ions), versus two-component (electron/proton) plasmas. We are focusing attention on the important characteristics of the charging process, namely the charging time, floating potential and current content as functions of plasma parameters such as He⁺⁺/H⁺ (α/p) number density and T_α/T_p temperature ratios of alpha particles to protons, as well as plasma streaming velocity v₀. Measured statistical properties of solar wind plasma parameters at 1 AU show considerable variations in α/p-temperature ratios from 1 to 10, in α/p-number density ratio from 0.01 to 0.35, as well as in values of streaming velocity v₀ from 200 km/s to 1000 km/s and more. Periods of these variations could last for several days each, leading to significant variability in the charging process, according to newly derived general analytical expressions. Numerical calculations performed for protons/alphas plasmas showed large disparity in the charging characteristics. For example, in anisotropic plasma, grain charging time varies up to 90% depending on α/p-particles temperature and number density ratios, whereas changes in floating potential are up to 40%. In contrast, in isotropic plasma, charging characteristic for grains do not change very much for the same plasma parameters variations, with charging time varying about 12% and floating potential only varying about 4%. It is also shown that in highly anisotropic plasma, with all ballistic electrons and ions, dust grains could not hold their charges, and characteristic discharged time is calculated. We note that the analysis is equally applicable to any sized body immersed in solar wind plasma.